To measure and control pH, Redox Potential, Chlorine Free and Temperature

Includes:

- Electricity Meters pH and chlorine free PC95 and Redox Potential PR75.
- Probe to amperometric Chlorine Free (Pt-Cu).
- Probes pH and Redox.
- Self and performance of sensors (pH, chlorine-free and redox)
- Input filter and valve for Self measures.
- Installation kit included.

KONTROL Panel Series Features:

- Self for all measures
- Sensor with Portasondas flow regulating valve and flow control.
- Alarm signal for lack of flow.
- Instrument with IP65 degree of protection.
- 2 relays Connection (5A - 250 Va).
- Departures 4 .. 20 mA for each of the measured parameters, the possibility of imposing the range.
- Food: 230 Vac (standard) or 155 Vac (upon request).
- Set point and configurable alarm.
- Bombs in pause mode during calibration.
- Measure and temperature compensation probe PT100
- Compensation of the extent of chlorine with pH.

Technical Data:

Instrument PC95:
ACTION: 240 mm - 245 mm - 140 mm.
INDEX OF PROTECTION: IP65.
SECTION of the terminals: 4mm2, or 2.4 mm diameter.
FOOD: Standard 230V 50-60 Hz.
CONSUMPTION: 15W.
Relays CONTROL: 2 (Free Chlorine and pH).
MAXIMUM CAPACITY IN RELAY: 3A 250VAC (with resistive load).
TEMPERATURE OF WORK: 0 ... 50 ° C.
Storage temperature -10 ... +70 ° C.
SCALE OF MEASURE OF pH: 0 ... 14.00 pH.
ACCURACY: 0.01 pH unit.
Input impedance:> 1013 ohm.
COMPENSATION IN TEMPERATURE: Manual / Automatic 0 ... 125 ° C.
3 TYPES OF SCHEDULE SET POINT: On / Off - Proportional - Beats.
Analog Outputs: 0 / 4 ... 20 mA for each parameter. Resolution 255 points. 1 K ohm maximum load.
SCALE OF MEASURE Cl: 0 ... 5.00 ppm or mg / l.
ACCURACY: 0.01 ppm.
COMPENSATION WITH PH: Valid until pH 8.30.
CAL PARAMETERS: Automatic.
FLOW SENSOR: Included.

Instrument PR75:
DIMENSIONS: 144 * 144 * 103 mm.
PLAN FOR FIXING: 136 * 136 mm +2 mm. max.
INTERNAL MEASURES: 90 mm.
DEGREE OF PROTECTION: IP65.
SECTION of the terminals: 4mm2, or 2.4 mm diameter.
FOOD: Universal 22 ... 265V 50-60 Hz.
CONSUMPTION: 3W.
MAXIMUM LOAD ON RELAY: 3A 250VAC.
OUT IN FREQUENCY: OPEN-COLLECTOR-80V MAX 50mA.
TEMPERATURE OF WORK: 0 ... 50 ° C.
Storage temperature: -10 ... +70 ° C.
SCALE OF MEASURE redox -999 ... +999 mV.
ACCURACY OF ACTION: ± 1 mV.
Input impedance:> 1013 ohm.
SPEED OF ACQUISITION: 3 seconds.
CALIBRATION redox ± 150 mV.
TEMPERATURE COMPENSATION MANUAL / AUTO 0 ... 125 ° C.
SETTING THE SET POINT: ON / OFF - PAUSE / PERFORMANCE.
Hysteresis THE SET POINT: 10 mV.
TRANSMITTED OUTPUT: 4 ... 20 mA. Resolution 200 points, 400 ohm load.