Panel to measure and adjust the concentration of free chlorine and temperature.


Includes:

- Instrument Meter Free Chlorine CL95.
- Probe to amperometric Chlorine Free (Pt-Cu) self.
- Self with the physical and chemical characteristics of water measure.
- Valve closure of the flow of water to the Self.
- Input filter and valve closure for calibration.
- Including installation kit.

KONTROL Panel Series Features

- Self for all measures.
- Sensor with Portasondas flow regulating valve and flow control.
- Alarm signal for lack of flow.
- Instrument with IP65 degree of protection.
- 2 relays Connection (5A - 250 Va).
- Departures 4 .. 20 mA for each of the measured parameters, the possibility of imposing the range.
- Food: 230 Vac (standard) or 155 Vac (upon request).
- Set point of chlorine and configurable alarm.
- Bombs in pause mode during calibration.
- Measure and temperature compensation with PT100 probe.

Technical Data:

Instrument CL95:
ACTION: 240 mm - 245 mm - 140 mm.
INDEX OF PROTECTION: IP65.
SECTION of the terminals: 4mm2, or 2.4 mm diameter.
FOOD: Standard 230V ± 10% 50-60 Hz at the request 115V.
CONSUMPTION: 15W.
MAXIMUM CAPACITY IN RELAY: 3A 250VAC (with resistive load).
TEMPERATURE OF WORK: 0 ... 50 ° C.
Storage temperature: -10 ... +70 ° C.
COMPENSATION IN TEMPERATURE: manual / automatic: 0 ... 125 ° C.
SETTING THE SET POINT: ON / OFF - PAUSE / WORK.
PROPORTIONAL FLOW IN: Repeater remote far: 0 / 4 ... 20 mA galvanically separate, fully configurable measurement for broadcast or regulation. Resolution 255 points, 1 K ohm load
SCALE OF MEASURE Cl: 0 ... 5.00 ppm or mg / l.
COMPENSATION IN TEMPERATURE: manual / automatic 0 ... 125 ° C.
SETTING THE SET POINT: ON / OFF - PULSES - PROPORTIONAL FLOW IN.