Probes conductivity with temperature sensors (PT100)

Our range of conductivity probe has been specifically designed for applications in industrial environment, combined with our measurement instruments.

The number of available models allow to cover a very wide range of measurement.

The measurement of the conductivity is done by immersing two electrodes metal in the solution to measure, the passage of current between two electrodes to measure the electrical resistance of the liquid and therefore its conductivity.

The measurement depends on the temperature in saline solutions are measuring variations of 2% / ° C, this variation may also come to 7% / ° C; hence the use of the probes without conductivity temperature sensor is possible only if the solution examination is held at a temperature of between 15 ° C and 25 ° C making a mistake about 10%.

Note: All models are guaranteed to a maximum pressure of 6 bar.

type probe	Measurement Range	CK	Maximum temperature	Material body electrodes	connection with the process	Connection
CT-K1 SS	0.01 ... 20,000 uS	C = 1 cm -1 K = 1 cm	100 º C	TEFLON	1 "GM	5 or 10 meters. with 2-pole connector
CT-K1 Gr	1 ..... 20,000 uS	C = 1 cm -1 K = 1 cm	50th C	PVC	1 "GM	5 or 10 meters. with 2-pole connector